Plamen Tena N

Plamen Tena N brings wood-fired warmth into the room where you spend time. It is a room-heating stove: the useful heat is released around the appliance, making the fire part of everyday life as well as the room’s atmosphere.

Useful warmth, matched to your home

The listed nominal heat output is 9.5 kW. Use the nominal rating when comparing models for everyday heating; maximum output, where stated, is a different measure and should not replace a heat-loss calculation.

The space a stove can heat depends on insulation, ceiling height, windows and how rooms connect. A higher kW rating is not automatically a better choice. Matching the output to your home helps you choose a stove that suits the way you live.

What the efficiency means in practice

The listed efficiency is 81.1%. Under the declared test conditions, this is the share of the fuel’s energy converted into useful heat. It helps compare appliances, but is not a promise of a fixed saving on your heating bill.

The energy efficiency class is A+. Read it alongside the output and efficiency figures: the energy label supports comparison, while the right size for your home remains just as important.

For good results, use the wood specified in the operating instructions, keep it properly seasoned and follow the recommended fuel load and air settings. Wet wood and unsuitable operation can reduce performance and make the glass and flue dirtier.

Design that fits the way you use the room

A freestanding stove gives you a defined focal point without requiring a full built-in fireplace surround. Consider the view from your seating area, access to the loading door and the route of the flue when choosing its position.

The appliance body measures 750 × 520 × 750 mm (width × depth × height). These dimensions help you compare its presence in the room and plan the delivery route. The final installation also needs space for the hearth, flue and required safety clearances.

The manufacturer states a maximum log length of 50 cm. This is useful when choosing firewood and comparing the model with stoves that have a shorter combustion chamber.

The cast-iron body gives this model a substantial construction and a traditional material character. Allow for its weight when planning the supporting floor and delivery access.

The listed finish is Grey. Check the selected option and product images before ordering, especially where more than one finish or layout is offered.

Tena N has a 750 mm-wide body and a large glazed door that makes the fire a prominent part of the room. Its firebox is wider than Amity 3's, while both accept logs up to 50 cm. The 163 kg weight and 520 mm body depth should be checked against the delivery route and planned hearth.

Plan the installation before you order

The listed flue connection diameter is Ø150 mm. This is a starting point for checking chimney compatibility; the required draught, connection arrangement and local installation rules also matter.

The listed appliance weight is 163 kg. Check access through doors and any steps on the delivery route, and make sure the supporting floor and hearth are suitable.

Have a qualified installer check the chimney, combustion-air supply, floor protection and the manufacturer’s clearances. Appliance dimensions alone do not establish a safe installation position. Keep the operating instructions for future use and maintenance.